Prüfverfahren für Reibung und Verschleiß von Motorradkupplungen
Generally, the basic requirements for laboratory sample test methods are: ①simulation, the test data requirements are consistent with the road test or bench test results; ②sensitivity, when the composition and process of the tested material change, the performance will change slightly. ③Reproducibility, when the same material is tested under the same conditions, the data obtained should be the same. Among the above three requirements, one requires the determination of very important test conditions: At the same time, the actual operating conditions of motorcycle clutches are mainly considered as the main basis for determining the test conditions.
Aus Sicht der Relativbewegung kann der treibende Eingriffsvorgang der Kupplung als dem Bremsvorgang nahestehend betrachtet werden. Beide sind am Anfang, wenn zwischen Master und Follower eine Geschwindigkeitsdifferenz besteht und dann die Geschwindigkeitsdifferenz Null ist. Für die Nassprüfung kann die von uns in China entwickelte Prüfmaschine MM-1000 eingesetzt werden. Diese Maschine ist derzeit als Prüfmaschine mit guter Simulationsleistung, Empfindlichkeit und Reproduzierbarkeit in der heimischen Reibmaterialindustrie anerkannt.
Bestimmung des prüfspezifischen Drucks:
Als Arbeitsdruck bezeichnet man die Anpresskraft pro Reibflächeneinheit des Belags bei geschlossener Kupplung. Der spezifische Arbeitsdruck des Kupplungsreibungspaars der wichtigsten Motorradmodelle in meinem Land beträgt etwa {{0}},3 MPa, daher verwendet diese Testmethode drei spezifische Drücke von 0,2 0,3 0,5 MPa, die alle Motorradmodelle abdecken Kupplungen.